Sensor-Finder





Sensor-Finder

Gas-Flow-Sensors

FS8001

Specification

Category: Gas-Massflow-Sensors
Manufacturer: Siargo
Measuring range: 1 ~ 700 mln/min
Temp. range: 0~55 C°
Pressure range: 0~5 bar
Pressure drop: -
Power supply: 8 - 24 VDC
Input signal: -
Output signal: Analog: 0,5 - 4,5 VDC (linear), Digital: I2C
Process connection: FS8001: 2 x M5 (female)
Special features:
  • Perfect and flexible communication: Linear analog output and digital I2C
  • Easy integration: Small size (12 x 35 x 22 mm), light weight
  • Low power consumption
  • High sensitivity - detection of lowest flow rates
  • Low pressure drop
  • Fast response time: 5 ms
  • Ideal for Pick & Place control of smallest parts
Media: Gases: Air, N2
Accuracy: ±(2.0 oR +0.5 FS)%...1-15 ml ±(2.0 oR +1.0 FS)%
Repeatability: ±1.0 % FS
Response time: 5 ms (1 ms possible)
Turn-Down-Ratio: 0~15~50 ml/min (50:1); 0~150~500 ml/min (100:1)
Display: 0

Description

The compact light-weight FS8000-Series Gas-Massflowsensors were designed for fast response (5 ms) Gas flow measurement of smaller flow rates. They are at present available in 4 standard flow ranges:
  • FS8001: 0 ~ 15 mln/min (Ref. 1013,25 mbar, 20°C)
  • FS8001: 0 ~ 50 mln/min (Ref. 1013,25 mbar, 20°C)
  • FS8001: 0 ~ 150 mln/min (Ref. 1013,25 mbar, 20°C)
  • FS8001: 0 ~ 500 mln/min (Ref. 1013,25 mbar, 20°C)
  • FS8001: 0 ~ 700 mln/min (Ref. 1013,25 mbar, 20°C) - Special selection/calibration
Due to the compact design and the light weight the FS8000 can be easily implemented in portable gasdetectors, air samplers or gas analysers. They are also used to monitor the filter load or the proper functionality of micro-nozzles (clogging) in pick and place applications. The standard digital I2C-Interface and analog output enable easy integration in SMD pick and place machines to control in real time the proper pick & place process of electronic and optical components. A preventing monitoring and detection of nozzle clogging of the SMD vacuum grippers will safe time and money and bring added value to manufacturers.

CAD-Files

Pictures